NOTE: The management module shuts down the operating system gracefully. Use the SDScript file for other tasks, such as backing up files to tape or shutting down a database.
c.Enter the estimated time required to complete the procedure in the Execute Command field.
7.Select the Run Event Procedure checkbox to execute the event handling script on the server on which the agent is installed and running. While the SDScript executes during a shutdown event, the EVScript executes during a UPS event. You can modify the script content to enable actions such as logging events in the system log and sending messages to a recipient.
8.Enter the estimated time required to shut down the server in the Shut Down Operating System field.
9.Enter the estimated time required to run shutdown commands in the Execute Command field.
10.Do one of the following:
oClick Save Changes to save the information. The newly added device displays under the specific load segment. The status icons in front of the device link indicate the redundant configuration status and the communication status between the agent and the management module.
oClick Undo Changes to undo the changes. o Click Delete Device to delete the device. o Click Help to view online help.
Power Fail menu
Click Power Fail in the left navigation frame to display the Power Fail screen. This screen enables administrators to configure how the management module should shut down attached devices in the event of a power failure.
NOTE: Depending on the specific UPS model, this screen will vary.
To configure shutdown for the load segments:
1.Configure the Shutdown Settings for each device using one of the three options in the Shutdown Settings column.
o Conserve Battery
HP UPS Management Module web interface 71
