HP A6584A manual Installing the agent on SLES, silent mode. This option is supported only on Linux

•Change any items that should be unique, such as the Management Server IP address, through the normal operation of the software.

To install the agent using the silent installation method:

1.Create a temporary directory.

2.Copy the following files into the temporary directory you just created:

o DevManRA.ini—During an assisted install, this file is landed in the same folder in which the agent is installed.

o EULA.txt—This file is included with the installation files on the HP Infrastructure Management Pack CD and the software download package on the HP website (http://www.hp.com/go/rackandpower).

o SetupRA—This file is included with the installation files on the HP Infrastructure Management Pack CD and the software download package on the HP website (http://www.hp.com/go/rackandpower).

o Uninstall—This file is included with the installation files on the HP Infrastructure Management Pack CD and the software download package on the HP website (http://www.hp.com/go/rackandpower).

o HPRA-4.5-x.i586.rpm—This file is included with the installation files on the HP Infrastructure Management Pack CD and the software download package on the HP website (http://www.hp.com/go/rackandpower).

3.From the directory that contains all five files, run ./SetupRA -s-f <path> DevManRA.ini to install silently.

Replace <path> with the DevManRA.ini file location.

The following command line parameters can be specified and are applicable for both interactive and silent modes.

Parameter	Function
-s	Performs a silent install.
-log	Creates an installation log
	(/user/local/DevMan/install.log). Default is
	disabled for interactive mode and enabled for
	silent mode. This option is supported only on Linux.
	The installation log is created automatically for
	Windows® during silent installations in
	\%systemdrive%\setup.log.
-f DevManRA.ini	Specifies a configuration .ini file used for clean
	installs. When this option is specified, the device
	detection and configuration step is omitted.

Installing the agent on SLES 10

1.Install the agent using the Linux installation script ("Installing the agent using the installation script" on page 33).

-or-

Install the agent using the Linux silent installation method ("Installing the agent using the silent installation method" on page 34).

2.Do one of the following:

Installing the HP UPS Power Protection Agent 35