Press to turn off the unit.
Turning off the remote control function of the sub units

When using the multiple sub units near each other, all the sub units may receive the same signal from the remote and the main unit may not function properly. To prevent this, you can turn off the remote control function of the sub units.

Use buttons on the sub unit whose remote control function you want to turn off.

1

2 Press DISPLAY repeatedly until the clock is displayed.3 Press while holding down

CLOCK/TIMER ENTER.

“RMT OFF” appears in the display and the sub unit is turned on. If you try controlling the sub unit using the remote, “RMT OFF” appears in the display and the sub unit will not accept the signal from the remote.

To turn on the remote control function

Perform steps 1 and 3 above and check that “RMT ON” appears in the display.

Note

Even when the remote control function is turned off, and VOLUME +/on the remote will continue to function.

Changing the illumination brightness of the main unit

Press ILLUMINATION repeatedly.Each time you press the button, the illumination brightness changes as follows:Bright Darkened Off

Operations

31GB