Pioneer S-HTD330 Error Messages, page 18 and Connecting external antennas on page, Desciption

12Additional information

Problem	Remedy
Sound is mono only.	• Check that the tuner is not set to FM mono (see Improving poor FM
	reception on page 35).
Considerable noise in radio	• Tune into the correct frequency.
broadcasts.	• Connect the antenna (see Connecting the supplied antennas on
	page 18 and Connecting external antennas on page 77).
	• Fully extend the FM wire antenna, position for best reception, and
	secure to a wall.
	• Connect an outdoor FM antenna (see Connecting external antennas
	on page 77).
	• Adjust the direction and position for best reception.
	• Connect an additional internal or external AM antenna (see AM loop
	antenna on page 18 and Connecting external antennas on page 77).
	• Turn off any other equipment that may be causing the noise or move
	it away from the system unit.
	• The tuning interval is incorrect for your country or region. Try
	switching the tuning interval (frequency step) (see Changing the
	frequency step on page 73).

Error Messages

Message	Desciption
Child Lock	• This message appears when the front panel buttons are pressed
	when the child lock feature is active. See Child Lock on page 73 for
	more on switching on/off the child lock.
Rec Mode On	• Blinks rapidly for 2 seconds when an operation is prohibited
	because the Recording Mode is on (see Recording mode on page 78).
Phones In	• Blinks rapidly for 2 seconds when an operation is prohibited
	because headphones are connected.
96K Stereo	• Blinks rapidly for 2 seconds when an operation is prohibited
	because the source is digital 88.2 or 96kHz PCM.
No Surr. SP	• Blinks rapidly for 2 seconds when an operation is prohibited
	because there is no surround speaker output.
Muting	• Blinks rapidly for 2 seconds when an operation is prohibited
	because the sound is muted (see Muting the sound on page 41).
Exit	• Appears briefly when a menu is automatically exited after a set
	period of inactivity.

82

En