Getting started | 04 |
3 Tune to a frequency.
There are three tuning
•Manual tuning: Press TUNE +/– repeatedly to change the displayed frequency.
•Auto tuning: Press and hold TUNE +/– until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to search for other stations.
•
• You can use the and
buttons on the front panel instead of the TUNE +/– buttons.
Improving poor FM reception
If you’re listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono.
1Press SYSTEM SETUP (SHIFT + HOME MENU).
2 Use the (cursor left/right) buttons to choose ‘FM Mode?’, then press
ENTER.
3 Use the (cursor up/down) buttons to select ‘Mono’ or ‘Auto’, then press ENTER.
Select Auto in step 3 to switch back to auto- stereo mode (the stereo indicator lights when receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time.
1Tune to an AM or FM radio station. For the FM band, select mono or
2Press SYSTEM SETUP (SHIFT + HOME MENU).
3 Use the (cursor left/right) buttons to choose ‘St. Memory?’ then press ENTER.
4 Use the (cursor up/down) buttons to select the station preset you want.
There are 30 preset locations; each can store one station preset.
5 Press ENTER to save the station preset.
•If the system is unplugged from the power supply completely, saved stations will remain for several days, after which you’ll have to save them again.
Listening to station presets
1Make sure the TUNER function is selected.
2Use the ST +/– buttons to select a station preset.
•If you are using the front panel controls, press TUNER FM/AM/ST. until you’re in station preset mode, then use the
and | buttons to select a station |
preset. |
|
35
En