Getting started | 04 |
4 Press ENTER again to finish setting up.
Let's Get Started Menu
Setup complete
If you're finished setting up, choose [Complete],
to start again choose [Back]
CompleteBack
• Use the (cursor right) button to select BACK then press ENTER if you want to go back and change the setting you just made.
• You can also use the OPEN/CLOSE button on the front panel or the function buttons (DVD/CD, TUNER, etc.) to switch the system on from standby.
2 If CLOCK ADJ isn’t already shown in the display, press or (cursor left or right) until you see it.
3 | Press ENTER. |
|
4 | Use the | (cursor up/down) |
buttons to set the hour. | ||
5 | Press ENTER. |
|
6 | Use the | (cursor up/down) |
buttons to set the minute.
7 Press ENTER to confirm.
The display flashes to indicate the clock is set.
•Press TIMER (SHIFT + 6) anytime to display the clock.
•If you unplug the system from the wall outlet, or there is a power outage, you will need to set the clock again.
•The system switches on, but there is nothing displayed on my TV.
Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this system to the VIDEO 1 input on your TV, switch your TV to VIDEO 1.
Setting the clock
Setting the clock allows you to use the timer features.
1Press TIMER (SHIFT + 6).
•If you are adjusting the clock, rather then setting it for the first time, press TIMER (SHIFT + 6) again.
Using the Room Setup
Before using your DVD system to enjoy surround sound playback, we recommend you spend a few minutes using the Room Setup. This is a quick and easy way to get good surround sound for your room.
Depending on the distance of the surround speakers from your main listening position, choose between S (small), M (medium), or L (large) room, then depending on your seating position relative to the front and surround speakers, choose Fwd (forward), Mid, or Back.
27
En
