Connecting up
•It’s also possible to fix the AM antenna to a wall using two screws (see illustration below). Before fixing, make sure that the reception is satisfactory.
02
Connecting the power
Before connecting the power and switching on for the first time make sure that everything is connected properly.
FM wire antenna
•Connect the FM wire antenna to the FM UNBAL 75Ω terminal in the same way as the AM loop antenna.
For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.
• The signal ground ( ) is designed to reduce noise that occurs when an antenna is connected. It is not an electrical safety ground.
AC IN
FM UNBAL 75
AM LOOP
ANTENNA
Power outlet
1Plug one end of the supplied power cable into the AC INLET.
2Plug the other end into a household power outlet.
•See Connecting auxiliary components on page 77 for details of other connections you can make with this system.
19
En
