Pioneer S-HTD330 manual Additional information Troubleshooting, General

Additional information 12

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

•If the system does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

General

ProblemRemedy

The power does not turn on. • Connect the power plug to the wall outlet.

•Disconnect the power plug from the outlet, and insert again.

•Make sure there are no loose strands of speaker wire touching the rear panel. This could cause the system to shut off automatically.

No sound is output when a • If you’re using the line input, make sure the component is

function is selected. connected correctly (see Connecting auxiliary components on page 77).

•Press MUTE on the remote control to turn muting off.

•Adjust the VOLUME.

No image is output when playing discs.

•Make sure the TV is connected correctly (see Connecting to your TV on page 16).

•Reset the video output to interlace (see Connecting to your TV on page 16

No sound from surround or center speakers.

•Refer to Setting the channel levels on page 62 to check the speaker levels.

•Check that you haven’t selected the STEREO sound mode (see Listening in stereo on page 38).

•Check that the Virtual Advanced Surround mode is not on (see Using the Advanced Surround effects on page 39).

•Connect the speakers properly (see Connecting the speakers on page 13).

79

En