05Home theater sound

Music – Pro Logic II 5.1 channel surround sound, especially suited to music sources, for use with any two-channel source (see also Dolby Pro Logic II Music settings below)

Stereo – See Listening in stereo below

See also Using the Advanced Surround effects below, for further stereo and surround playback options.

You can’t use the Surround modes with high sampling rate 88.2 / 96 kHz sources.

When listening in Dolby Digital / DTS mode, two-channel material will automatically be played in surround sound using Dolby Pro Logic decoding.

Dolby Digital / DTS sources that use only the center channel cannot be played back in surround sound.

Dolby Pro Logic II Music settings

When listening in Dolby Pro Logic II Music mode, there are three further parameters you can adjust: Center Width, Dimension, and Panorama.

1With Dolby Pro Logic II Music mode active, press SOUND MODE.

2 Use the (cursor left/right) buttons to select ‘C Width’, ‘Dimen.’ or ‘Pnrm.’

C Width (Center Width): Makes the center channel wider (higher settings) or narrower (lower settings)

Dimen. (Dimension): Makes the sound more distant (minus settings), or more forward (positive settings)

38

Pnrm. (Panorama): Creates more spacious surround sound

3 Use the (cursor up/down) buttons to adjust the setting.

Center Width is adjustable between 0 and 7; Dimension between –3and +3. Panorama is On or Off.

4 Press ENTER to confirm.

Listening in stereo

You can listen to any source—stereo or multichannel, analog or digital—in stereo. When playing a multichannel source, stereo sound is created by downmixing all channels to the front left/right speakers and the subwooofer.

SURROUND

Press SURROUND repeatedly until ‘Stereo’ shows in the display.

Any active Advanced Surround mode is cancelled.

See also Using the Advanced Surround effects below, for further stereo and surround playback options.

Listening with headphones

When headphones are connected, only the Stereo (default) and Phones Surround (virtual surround sound for headphones) modes are available.

When you connect a pair of headphones, the listening mode automatically changes to Stereo. When you disconnect them it reverts to the previous mode.

En

Page 38
Image 38
Pioneer S-HTD330 Home theater sound, Listening in stereo, Listening with headphones, Dolby Pro Logic II Music settings