Pioneer S-HTD330 manual Reducing the TV and line signal levels, Recording mode

12Additional information

•Connect the COAX IN (LINE 2) jack on the rear panel to the coaxial digital output of an external playback component.

COAXIAL IN

LINE 2

These include digital components such as an MD player, digital satellite, or a game system. Connect using a coaxial digital cable (not supplied).

Reducing the TV and line signal levels

• Default setting: ATT 6dB

Some sources may produce a high signal level which may produce unpleasant distortion from the speakers. In such cases, you may need to reduce the signal level of the auxiliary source (connected to the TV or LINE 1 analog inputs) by switching on the attenuator.

1Switch the system into standby.

2Press SYSTEM SETUP (SHIFT + HOME MENU).

3 Use the (cursor left/right) buttons to select ‘TV ATT ?’ or ‘LINE1 ATT?’, then press ENTER.

4 Use the (cursor up/down) buttons to select ‘ATT OFF’, ‘ATT 6dB’ or ‘ATT 10dB’.

If the ATT 6dB setting still results in distorted sound, try the ATT 10dB setting.

5 Press ENTER to confirm.

Recording mode

The Recording mode allows you to make analog recordings from the LINE 1 (OUT) jacks.

When Recording mode is on, most sound- related functions (including SURROUND,

ADVANCED, AUTO, SYSTEM SETUP) become inactive. The display will briefly blink RecMode On if you try and use a prohibited function while Recording mode is on.

When Recording mode is off, the audio from the analog output may be interrupted, depending on the operation.

1	Press SOUND MODE.
2	Use the Use the	(cursor left/

right) buttons to select ‘Rec Mode?’.

3	Press ENTER.
4	Use the	(cursor up/down)

buttons to select ‘R.Mode On’ or ‘R.Mode Off’.

78

En