Pioneer S-HTD330 manual PhotoViewer, Setting/changing the Country Code, 11Initial Settings menu

11Initial Settings menu

Setting/changing the Country Code

You may also want to refer to the Country code list on page 84.

1 Select ‘Country Code’.

Initial Settings
Video Output	Parental Lock	Password Change
Language	PhotoViewer	Level Change
Display		Country Code
Options

2Use number buttons to enter your password, then press ENTER.

Initial Settings
Video Output	Parental Lock: Country Code
Language		Password	*	*	*	*
Display
Options	Country Code List			Code
		us	2	1	1	9

3 Select a country code.

There are two ways you can do this.

• Select by code letter: Use						(cursor
	up/down) to change the country code.
	Initial Settings
	Video Output	Parental Lock: Country Code
	Language	Password		*	*	*	*
	Display
	Options	Country Code List			Code
			us	2	1	1	9
• Select by code number: Press							(cursor

right) then use the number buttons to enter the 4-digit country code (you can find the Country code list on page 84.)

Initial Settings
Video Output	Parental Lock: Country Code
Language		Password	*	*	*	*
Display
Options	Country Code List			Code
		us	2	1	1	9

4Press ENTER to set the new Country Code and return to the Options menu screen.

•Changing the country code does not take effect until the next disc is loaded (or the current disc is reloaded).

PhotoViewer

•Default setting: On

Initial Settings
Video Output	Parental Lock	On
Language	PhotoViewer	Off
Display
Options

This setting is important if you load a disc that contains both WMA/MP3 audio files and JPEG picture files.

The default On setting allows you to view only the JPEG files on this kind of disc. Set to Off to be able to play the WMA/MP3 audio files.

Note that when this setting is changed, discs already loaded (other than in the play position) that contain both WMA/MP3 audio files and JPEG picture files will show up as

???in the Disc Navigator and program list screens until they are reloaded.

72

En