Pioneer S-HTD330 Before mounting, Connecting up, Front L, Front R, woofer, Center, Surround L

Connecting up 02

•The illustration below shows typical speaker placement for a surround sound system.

Front L	Front R
	Sub-
	woofer
	Center
Surround L	Surround R

•Make sure that all speakers are securely installed. This not only improves sound quality, but also reduces the risk of damage or injury resulting from speakers being knocked over or falling in the event of external shocks such as earthquakes.

•The front, center and surround speakers supplied with this system are magnetically shielded. However, placing them extremely close to a television may result in color distortion on the screen. If this happens, move the speakers a little further away and switch off the television for 15–30 minutes.

•The subwoofer is not magnetically shielded and so should not be placed near a TV or monitor.

Wall-mounting the center and surround speaker system

Before mounting

•Remember that the speaker system is heavy and that its weight could cause the wood screws to work loose, or the wall material to fail to support it, resulting in the speaker falling. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Do not mount on plywood or soft surface walls.

•Mounting screws are not supplied. Use screws that are suitable for the wall material and that will support the weight of the speaker.

5 mm

10 mm

5 mm

Wood screw

Protrusion: 5-7mm

•If you are unsure of the qualities and strength of the walls, consult a professional for advice.

•Pioneer is not responsible for any accidents or damage that result from improper installation.

15

En