Using only the front | Adjusting the level |
speakers (2 Channel Stereo) | parameters |
SOUND
FIELD
Press 2CH ST on the receiver or SOUND FIELD on the remote repeatedly until “2CH STEREO” appears on the front panel display.
This mode outputs the sound from the front left and right speakers only. Standard 2 channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to 2 channel.
Notes
•To listen to 2 channel (stereo) sources using the front left and right speakers and a sub woofer, press AUTO DEC on the receiver or SOUND FIELD on the remote repeatedly to select “AUTO DECO.”
•Depending on the speaker setting, the sound is output from the sub woofer.
The level menu contains parameters that let you adjust the balance and speaker volumes of each speaker (page 27).
ENTER |
| Sound |
|
| |
C/X/x/c |
| Adjustments |
| AMP MENU | |
|
|
1 Start playing a program source encoded with multichannel surround sound.
2 Press AMP MENU repeatedly.
9LEVEL appears on the front panel display.
3 Sit in your listening position and select the item to be adjusted using X/x.
4 Adjust the volume level using C/c.
The adjusted value will appear on the front panel display. If you do not operate the remote for a few seconds, the value turns off and is stored in the receiver.