Sony AVD-S50 60GB, the remote, Controlling satellite receivers with

Controlling the TV

You can control your TV using the buttons below.

By pressing	You can
TV [/1	Turn the TV on or off.

TV/VIDEO	Switch the TV’s input source
	between the TV and other input
	sources.

TV VOL +/–	adjust the TV volume.

TV CH +/–	change the TV channel.

WIDE	change the aspect ratio of your
	TV.

Note

Depending on the TV, you may not be able to control your TV or to use some of the buttons above.

RM SETUP

TV ?/1

AV ?/1

SAT

Number buttons

Note

For datails about buttons that can operate the satellite receiver, see page 61.

1 Press AV [/1 and RM SETUP simultaneously.

The SETUP indicator lights up.

2 Enter your manufacturer’s code (see the table) using the number.

The SET UP indicator flashes twice.

Code numbers of controllable

satellite receiver

If more than one code number is listed, try entering them one at a time until you find the one that works with your satellite receiver.