xBALANCE
You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
The default settings are underlined.
FRONT Adjust the balance between the CENTER front left and right speakers (You
can adjust from center 6 steps left or right).
REAR Adjust the balance between the rear CENTER left and right speakers (You can
adjust from center 6 steps left or right).
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the receiver or press VOLUME
xTEST TONE
The speakers will emit a test tone to adjust “BALANCE” and “LEVEL.”
OFF | The test tone is not emitted from the |
| speakers. |
|
|
ON | The test tone is emitted from each |
| speaker in sequence while adjusting |
| balance or level. |
| When you select one of the |
| “SPEAKER SETUP” items, the test |
| tone is emitted from both left and |
| right speakers simultaneously. |
|
|
Adjusting the speaker volume and
level
1 After you stop playback, select “SPEAKER SETUP” after pressing DVD SETUP in the Setup Display.
2 Select “TEST TONE” and set “TEST TONE” to “ON.”
You will hear the test tone from each speaker in sequence.
3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” and “LEVEL” using X/x.
The test tone is emitted from both left and right speakers simultaneously.
4 Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.
Note
When you adjust the speaker settings, the sound cuts off for a moment.