The sound loses stereo effect when
you play a VIDEO CD, or a CD.
,Set “AUDIO” to “STEREO” in the Control Menu display (page 46).
,Make sure you connect the receiver appropriately.
The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track.
,Make sure the sound field function is on (page 48).
,Check the speaker connections and settings (pages 24, 70).
,Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.
The sound comes from the center
speaker only.
,Depending on the disc, the sound may come from the center speaker only.
No sound is heard from the center
speaker.
,Check the speaker connections and settings.
,Make sure the sound field function is on (page 48).
,Select a sound field containing the word “cinema” (page 48).
No sound or only a very
sound is heard from the rear
speakers.
,Check the speaker connections and settings.
,Make sure the sound field function is on (page 48).
,Select a sound field containing the word “cinema” (page 48).
Operation
Radio stations cannot be tuned in.
,Check that the antennas are connected securely. Adjust the antennas and connect an external antenna if necessary.
,The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.
,No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 29).
,Press DISPLAY so that the frequency appears in the display.
The remote does not function.
,The controllable source on the remote is the satellite receiver. Press SAT on the remote (page 61).
,There are obstacles between the remote and the receiver.
,The distance between the remote and the receiver is too far.
,The remote is not pointed at the remote sensor on the receiver.
,The batteries in the remote are weak.
The disc does not play.
,There is no disc inside.
,The disc is turned over.
Insert the disc with the playback side facing down on the disc tray.
,The disc is skewed.
,The receiver cannot play
,The region code on the DVD does not match the receiver.
,Moisture has condensed inside the receiver. Remove the disc and leave the receiver turned on for about half an hour (page 4).