Transcription (continued)

Note

If the LTR or SEC signal is detected while the tape is being rewound with this function, the length of the reverse time may be longer than the setting you have selected.

14 Operations

Auto backspace function

This control operates only when the foot control unit is connected. With the use of the REVERSE TIME control, the tape is rewound a little each time it is stopped. Then, the last few recorded words can be reviewed when you resume listening. Adjust the REVERSE TIME control to determine the length of tape to be rewound.

At “9” position, the tape is rewound so that the dictated material can be reviewed for about 5 seconds*. At “0” position, the tape stops without being rewound at all.

Set the REVERSE TIME control to the desired position and keep the right side of the pedal depressed to listen to the tape.

*Measured at some point near the middle of the tape. The reverse time will vary in accordance with the remaining length of the tape.

REVERSE TIME : at “9” position

STOP is pressed at this point.

 

 

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tape

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

approx. 5 seconds

 

 

 

 

 

 

 

playback

 

 

 

 

 

Next playback will start from this point.

REVERSE TIME : at “0” position

 

 

 

 

 

 

 

 

 

 

 

STOP is pressed at this point.

 

 

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tape

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Next playback will start from this point.

Tape transport operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To

BM-845

Hand control unit

Foot control unit

 

 

 

 

 

 

 

 

 

 

Rewind

Press 0REW. Keep the function

 

 

Keep the left side of the

 

 

 

 

selector pressed down

pedal depressed.

 

 

 

 

toward B.SPACE.

 

 

 

 

 

Stop

Press p STOP.

Set the function

 

 

Release the pedal.

 

 

 

 

selector to STOP.

 

 

 

 

 

Listen

Press (

Set the function

 

 

Keep the right side of

 

LISTEN.

selector to LISTEN.

 

 

the pedal depressed.

 

 

 

 

 

 

 

 

 

 

Fast

Press )FF.

Keep the FWD SPACE

Keep the top center of

forward

 

 

 

button pressed.

 

 

the pedal depressed.

Private listening

Connect a Sony DE-45 or MDR-U10M earphones (not supplied) to the EARPHONE jack. The sound will be heard through the earphones and speaker sound will be disconnected.

Selecting the speaker

You can listen to the dictated material through the built-in speaker or the speaker on the hand control unit by switching the SPEAKER selector to BUILT-IN or HAND.

BM-845D. 3-859-341-11. U. E

Page 14
Image 14
Sony BM-845D manual Operations Auto backspace function, Private listening, Selecting the speaker