Removing dust from inside the viewfinder
(1)Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(2)Clean the surface with a commercially available blower.
1 | 2 |
To reattach the eyecup
(1)Align the groove on the eyecup with the • mark on the barrel.
(2)Turn the eyecup in the direction of the arrow. Then, replace the screw.
Additional information
1
2
Caution
Do not remove any other screws. You may remove only the screw to remove the eyecup.
39
