Superimposing a title
You can select one of eight preset titles. You can also select the position, and colour of titles in the menu system.
Using titles
To add the title from the beginning
(1) While the camcorder is in Standby mode, press TITLE repeatedly until the desired title appears.
Each time a new title appears, it is flashing. When the desired title appears, wait for it to stop flashing.
(2) Press START/STOP to start recording.
(3) When you want to stop recording the title, press TITLE.
To add the title while you are recording
(1) While the camcorder is in Standby mode, press TITLE repeatedly until the desired title appears.
Each time a new title appears, it is flashing.
(2) When the desired title appears, wait for it to stop flashing, and press TITLE again to erase the title from the display.
(3) Press START/STOP to start recording.
(4) When you reach the point where you want to add the title, press TITLE.
(5) When you want to stop recording the title, press TITLE again.
TITLE
Titles cycle as follows:
Original title 1 nOriginal title 2 nHELLO! nHAPPY BIRTHDAY nHAPPY HOLIDAYS nCONGRATULATIONS! nOUR SWEET BABY nWEDDING n VACATION nTHE END
After “THE END” appears, the title display disappears, and then Original title 1 returns.
Notes on superimposing a title
•If you have not made any original titles, they are not displayed.
•You cannot select a title while you are recording.
•FADER does not work while the title is displayed.
•You cannot simultaneously record the title and the date or time.
•You cannot record the title during
•If you display the menu while superimposing a title, the title is not recorded while the menu is being displayed.
42