Changing the mode settings

Selecting the mode setting of each item

Items for both CAMERA and VTR modes

COMMANDER <ON/OFF>

•Select ON when using the supplied Remote Commander for the camcorder.

•Select OFF when not using the Remote Commander.

REC MODE* <SP/LP>

•Select SP when recording in SP (standard play) mode.

•Select LP when recording in LP (long play) mode.

LCD B. L.* <BRT NORMAL/BRIGHT>

•Normally select BRT NORMAL.

•Select BRIGHT when the LCD screen is dark.

When you select BRIGHT, battery life is about 10 percent shorter during recording. When you use the power sources other than the battery pack, BRIGHT is automatically selected, and LCD B. L. is not displayed in the menu.

LCD COLOUR*

Select this item to adjust the colour on the LCD screen.

BEEP* <ON/OFF>

•Select ON so that beeps sound when you start/stop recording, etc.

•Select OFF when you do not want to hear the beep sound.

DISPLAY*

•Normally select LCD. The display appears on the LCD screen.

•Select V-OUT/LCD to show the display both on the TV screen and LCD screen.

Items for CAMERA mode only

WIND <ON/OFF>

•Select ON to reduce wind noise when recording in strong wind.

•Normally select OFF.

ORC TO SET*

Select this item to automatically adjust the recording condition to get the best possible recording.

If you have already performed this function, “ORC ON” is displayed.

TITLE COL* <WHITE/YELLOW/VIOLET/RED/CYAN/GREEN/BLUE>

Select the colour of the title.

TITLE POS* <CENTER/BOTTOM>

•Select CENTER to centre the title in the picture.

•Select BOTTOM to position the title at the bottom of the picture.

TITLE1 SET*/TITLE2 SET*

Store your own titles.

operations Advanced

27