Trouble check

Symptom

Cause and/or Corrective Action

The cassette cannot be removed

• The battery is dead.

from the holder.

mUse a charged battery pack or the AC power adaptor.

 

(p. 6, 24)

{and 6indicators flash and no

• Moisture condensation has occurred.

function except for cassette

mRemove the cassette and leave the camcorder for at least

ejection works.

1 hour. (p. 58)

 

 

The date or time indicator is

• You pressed DATE and TIME together for more than 2

flashing.

seconds.

mThe camcorder is not malfunctioning. You may start recording. Flashing will stop soon.

The lithium battery is weak or dead.

mReplace the lithium battery with a new one. (p. 52)

The tape does not move when a • The POWER switch is set to CAMERA or OFF.

video control button is pressed.

mSet it to VTR.

 

• The tape has run out.

 

mRewind the tape or use a new one. (p. 20)

The Steady Shot function does not

• STEADY SHOT is set to OFF.

 

activate.

mSet STEADY SHOT to ON. (p. 41)

 

• The Steady Shot function does not work when the wide

 

mode is set to 16:9 FULL.

 

The autofocusing function does

• FOCUS is set to MANUAL.

not work.

mSet it to AUTO. (p. 35)

 

• Shooting conditions are not suitable for autofocus.

 

mSet FOCUS to MANUAL to focus manually. (p. 35)

The fader function does not work.

• The START/STOP MODE switch is set to 5SEC or

 

.

 

 

mSet it to . (p. 14)

 

 

 

 

 

 

• A title is displayed.

 

mStop superimposing the title. (p. 42)

 

 

 

No sound or only a low sound is

• The stereo tape is played back with HiFi SOUND set to 1

heard when playing back a tape.

or 2 in the menu system.

 

mSet to STEREO in the menu system. (p. 29)

Excessive high-pitched sound is

• The picture has been recorded with WIND set to ON in the

 

heard.

menu system.

 

mWhen there is no wind, set it to OFF. (p. 27)

The date or time indicator

• Reset the date and time. (p. 53)

 

disappears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(to be continued)

information Additional

65