AREFERENCE INPUT connectors (BNC type) Accept reference signals (black burst signal) for external synchronization.

BRET-1/RET-2 (return video signal 1/2)connectors (BNC type)

Accept return video signals from two different systems.

For details on the selection of RET-1 and RET-2, refer to Operation Manual that came with the camera or camera adaptor.

CRET-3/PROMPTER (return video signal 3/prompter) connectors (BNC type)

Accept a return video signal or a teleprompter signal.

For details on the selection of RET-3, refer to Operation Manual that came with the camera or camera adaptor.

To set this connector to the PROMPTER output, it is required to change the setting in the internal board.

For details on the internal boards, consult your nearest Sony dealer.

DCOAX (coaxial) connector (BNC type) Accepts and supplies signals from/to the video camera using a coaxial cable. Power is not supplied to the camera and a camera adapter through this connector.

To use this connector, it is required to change the setting of the internal board. For details, consult your nearest Sony dealer.

dOUTPUT connectors

AVBS/SDI-1/VBS/SDI-2/VBS/SDI-3

connectors

B Y/G, R-Y/R, B-Y/B connectors

CPIX connector

DSYNC connector

EWF connector

AVBS/SDI-1/VBS/SDI-2/VBS/SDI-3 (composite

video signal 1/2/3 output) connectors (BNC type) Supply the signal from the video camera in composite or SDI format.

Use the switch on the internal board to select the signals to be output.

For details on the internal boards, consult your nearest Sony dealer.

BY/G, R-Y/R, B-Y/B (component video signal /RGB output) connectors (BNC type)

Supply the component signals or the R, G, and B signals for the chroma keyer from each connector.

Use the switch on the internal board to select the signals to be output.

For details on the internal boards, consult your nearest Sony dealer.

CPIX (picture monitor output) connector (BNCtype)

Supplies a video signal or video and character signals together to a picture monitor.

When using the RCP-D50 Remote Control Panel, you can select the signal output from the PIX connector using the MONITOR SELECT button on the menu of the RCP-D50. When the signal output from the PIX connector changes, the waveform output on the waveform monitor also changes.

DSYNC connector

Connect to the synchronous signal input connector on a waveform monitor or picture monitor

EWF (waveform monitor output) connector (BNC type)

Supplies a video signal to a waveform monitor. When using the RCP-D50 Remote Control Panel, you can select the signal output from the PIX connector using the MONITOR SELECT button on the menu of the RCP-D50. Changing the signal output from the WF connector simultaneously changes the picture on the picture monitor.

eREMOTE (RCP (remote control panel) remote) connector (10-pin)

Connects to the RCP-D50 Series Remote Control Panel with an optional CCA-7 connecting cable to transmit/ receive control signals.

fINTERCOM/TALLY/PGM (program audio) connector (D-sub, 25-pin)

Inputs/outputs intercom, tally, or program audio signals. Connects to an intercom, tally, or program audio connector of an intercom system.

gMIC REMOTE (microphone remote control)connector (D-sub, 15-pin)

Connects to an external control unit such as an audio mixer. With the connected unit, you can set the microphone input level of the video camera to –60, –50, –40, –30, or –20 dB.

hWF MODE (waveform monitor mode) connector (4-pin)

Connects to the corresponding connector on a waveform monitor to allow the sequential monitoring of signals.

10 Function and Location of Parts and Controls