Overview

The CCU-TX50/50P is a camera control unit that connects to DXC-D50 Series Color Video Cameras via the CA-TX50/50P Camera Adaptor.

Features of this unit are described below.

Full-featured signal transfer functions

•The CCU-TX50/50P is able to transfer wide band component video signals.

•The maximum triaxial cable length that can be used to

connect this unit to a camera adaptor is max. 750 m (when using a Belden φ8.5 mm cable) or 1125 m (when using a Belden φ13.2 mm cable).

•Transfer functions are provided for the following signals.

Return video, teleprompter signal, microphone audio, program audio, red tally and green tally signals

•An intercom system is also provided.

Flexibly adaptable camera control functions

•The camera control panel mounted on the front panel of the unit enables video camera operations to be controlled from the unit.

•When the RCP-D50 remote control panel is connected to the rear panel of the unit, the video camera operation can be controlled from both the remote control panel and the front panel of the unit.

Wide array of input/output signals

The input and output connectors provided for the CCU- TX50/50P include those for outputting such signals as a composite video signal (VBS), component video signals (switchable to RGB), SDI signals, and video signals for video and waveform monitors, for inputting a reference signal for external synchronization.

Status and self-diagnostics display on the picture monitor

You can check all sorts of settings of the unit and the results of self-diagnoses of internal boards on the monitor connected to the PIX connector on the rear panel.

Rack mountable

Two CCU-TX50/50P units can be installed side by side in the optional RMM-301 Rack Mount Bracket.

4 Overview