OFF: Turns off the headset microphone.

PGM: Outputs the program audio. When this position is selected, the INCOM level control adjusts input level of the program audio.

INCOM selector

Selects the pathway of intercom signals output/input through the INCOM connector.

PROD: Producer line.

PRIV: Producer line and engineer line are cut off and communication is possible only between the CCU- TX50/50P and the camera connected to the rear panel of the CCU-TX50/50P.

ENG: Engineer line.

eCALL button

fPANEL button g BARS button

h5600K button

i AUTO KNEE button j SKIN DTL button

k TLCS button

l CHARACTER button

m MASTER GAMMA adjustment knob

n DETAIL adjustment knob

eCALL button

When you press this button, the TALLY indicator on the camera adaptor lights. The tally indicator on the unit also lights red when you press this button, and goes off if the CALL button is pressed while it is lit.

fPANEL button

When the RCP-D50 camera control panel is connected, press this button to light it up so you can select the device which controls the camera.

The unit can control the camera when this button is lit.

gBARS button

Press this button (which lights up when pressed) to send the color bar signal to the monitor. The color bars then appear on the monitor.

h5600K button

Press this button (which lights up when pressed) to convert the color temperature electronically instead of using the optical filter.

iAUTO KNEE button

Press this button (which lights up when pressed) to activate the automatic knee function which optimizes the input signal compensation.

jSKIN DTL button

Use this button to turn the skin detail correction function on or off. Press this button (which lights up when pressed) to set the skin detail correction function to on. To set this function to off, press this button again.

kTLCS (total level control system) button

Press this button to turn the total level control system on or off. When this button is lit, it is turned on, and settings

6 Function and Location of Parts and Controls