Symptom

Remedy

 

 

It takes a long time for the

If the IC recorder is required to process a large amount of

IC recorder to start.

data, it may take longer for the IC recorder to start. This is not

 

a malfunction of the IC recorder. Wait until the start-up display

 

disappears.

The IC recorder does not

Take out the battery and insert it again (page 13).

operate correctly.

 

The IC recorder does not operate.

You may have formatted the memory of the IC recorder using the computer. Use the IC recorder formatting function to format the memory (page 69).

The IC recorder is not

Disconnect the IC recorder from your computer and reconnect

recognized by your

it.

computer.

Do not use a USB hub or USB extension cable other than

A folder/file cannot be

the supplied USB connection support cable. Connect the IC

transferred from your

recorder directly to your computer or use the supplied USB

computer.

connection support cable.

 

Operation is not guaranteed if you use any system

 

requirements other than those described on page 72.

 

Depending on the USB connector position, the IC recorder

 

may not be recognized. If this happens, try another connector.

 

 

The file transferred from

The file format may differ from those that can be played back

your computer cannot be

using the IC recorder (.mp3/.wma) (page 40). Check the file

played back.

name.

Please note that recorded messages may be erased during service or repair work.

102GB