Symptom

Remedy

 

 

The operation indicator

“LED” is set to “OFF” (page 70). Display the menu and set “LED”

does not light.

to “ON.”

“MEMORY FULL” is

The memory is full. Erase some of the messages (page 52) or

displayed and you cannot

erase all the messages after you store them on your computer.

start recording.

 

“FILE FULL” is displayed and you cannot operate the IC recorder.

99 messages have been recorded in the selectedfolder or 495 messages (when there are 5 folders) in total have been recorded. Therefore you cannot record another message, or move a message. Erase some of the messages (page 52) or erase all the messages after you store them on your computer.

Recording is interrupted. The VOR function (page 30) is activated. Set “VOR” to “OFF” in the menu (page 64).

Noise is heard.An object, such as your finger, etc., accidentally rubbed or scratched the IC recorder during recording so that noise was recorded.

The IC recorder was placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback.

Plug of the connected microphone was dirty when recording. Clean the plug.

The (headphones) plug is dirty. Clean the plug.

Recording level is low. “MIC SENSITIVITY” (microphone sensitivity) is set to “LOW (L).” Display the menu and set “MIC SENSITIVITY” to “HIGH (H)” (page 28).

98GB