The recording starts when the IC recorder detects sound. The recording pauses

when no sound is detected and “”and

“”flash. When the IC recorder detects sound again, the recording starts again.

To cancel the VOR function

Set “VOR” to “OFF” in step 3.

Notes

The VOR function is affected by the sound around you. Set “MIC SENSITIVITY” in the menu according to the recording conditions. If recording is not satisfactory after you have changed the microphone sensitivity, or for an important recording, set “VOR” to “OFF” in the menu.

If you press (record/pause) to pause recording when “VOR” is set to “ON” in the

menu, only “” flashes.

During synchronized recording (page 35) and FM recording (page 89), the VOR function does not work.

Dividing a message into two during recording

DIVIDE Recording/Playback Messages

You can divide a message during recording so that the message is divided into two parts, and a new message number is added to the newer part of the divided message.

31GB