3 Press or on the control button to select “SYNC REC,” and then press ENT.
4 Press or on the control button to select “ON,” and then press ENT.
5 Press (stop) to exit the menu mode.
6 Connect other equipment to the IC recorder when the IC recorder is in the stop mode.
Connect the audio output connector (stereo
“SELECT INPUT” appears in the display window.
7 Press or on the control button to select “AUDIO IN,” and then press ENT.
8 Press (record/pause) to start recording.
“
” flashes and the IC recorder enters the recording pause mode.
9 Start playback on the component connected to the IC recorder.
“
” appears on the display and synchronized recording starts.
The synchronized recording pauses when no sound is detected for more
than 2 seconds, and “
” flashes. The IC recorder starts recording again as a new message when sound is detected.
36GB