Getting Started

What cords will I need?

•Audio cord (1) (Use the cord supplied with the player to be connected.)

•Monaural (2P) mini-plug cord (1) (not supplied)

1Connect the players with an audio cord (see also “Hookups” on page 5).

CDP-CX230, etc.

CDP-CX350

LINE OUT

2ND CD

LINE

 

IN

OUT

 

L

L

L

 

 

R

R

R

 

 

2Connect the players with a monaural (2P) mini- plug cord.

CDP-CX350

CDP-CX230, etc.

CONTROL A1

CONTROL A1II

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For details on this connection, refer to the supplementary “CONTROL A1 Control System” instructions.

3Set the COMMAND MODE selector of this player to CD 1 or CD 2, and set the command mode of the second player to CD 3.

COMMAND MODE

CD

1 2 3

Inserting CDs

You can insert up to 300 discs into this player.

I/u OPEN/CLOSE JOG

+100

I / u

Playing position

Rotary table

Loading position

1Press I/uto turn on the player.

2Open the front cover by pressing OPEN/CLOSE.

For details on how to operate the second player, see “Controlling Another CD Player” on page 27 and “Playing Alternately” on page 29.

4Connect the AC power cord of both players to AC outlets.

Notes

3Turn the JOG dial until you find the disc slot where you want to insert a disc, while checking the disc number (written beside every slot and also indicated in the display).

+100

•Do not connect a player other than that you intend to use as the second player to the 2ND CD IN jacks of this player.

•When connecting a second CD player, do not connect the DIGITAL OUT (OPTICAL) connector of this unit to the amplifier.

•If you connect another CD player after you have already set up the remote, follow “Setting Up the Remote” on page 6 to set up the remote again.

•To operate the second CD player with the remote, press PLAYER SELECT on the remote to select the second player.

I / u

Disc number

Disc slot at the loading position

10GB