Playing CDs
3Select the desired program by pressing the Easy scroll key up or down, then press Easy scroll key.
CD1
P r o g r am
d a t a t r a n s f e r
CD1
D i s c 4
*D I SC4 * T r a c k 1
( TRACK 1 )
Program Play starts when the player finishes loading the program data from the remote. If the player fails in loading, the following message appears. Press the Easy scroll key again.
d a t a t r a n s f e r |
|
f a i l u r e | ! |
T r y a g a i n | ! |
Note
The program you create using the remote is stored in the player as PROGRAM 1. Note that the PROGRAM 1 you had created before is erased.
You can start playing a disc at any given time by connecting a timer (not supplied). Refer also to the instructions for the timer if you need help.
TIMER | Play mode buttons |
+100
I / u
1Press one of the play mode buttons to select the desired play mode.
2Set TIMER on the player to PLAY.
3Set the timer to the desired time.
The player turns off. When the set time comes, the player turns on and starts playing.
4After you have used the timer, set TIMER on the player to OFF.