Sony CDP-CX350 About the Supplied Remote Commander, Hookups, Connecting the AC power cord, Note on placement of the player, Understanding the 2 way remote system

Getting Started

Hookups

When connecting the audio cord, be sure to match the color-coded cords to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.

CD player		Amplifier
CD player		INPUT
2ND CD	LINE	INPUT
2ND CD	LINE
IN	OUT	CD
L	L	L
		L
R	R	R
		R

•If you have a digital component such as a digital amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL) connector using an optical cable (not supplied). Take off the cap and plug in the optical cable.

POC-15

Optical cable (not supplied)

CD player		Digital component
DIGITAL OUT		DIGITAL INPUT
	OPTICAL	OPTICAL

Note

When you connect via the DIGITAL OUT (OPTICAL) connector, noise may occur when you play CD software other than music, such as a CD-ROM.

If you have a Sony component with the CONTROL A1 jack

Connect the component via the CONTROL A1 jack. You can simplify the operation of audio systems composed of separate Sony components. For details, refer to the supplementary “CONTROL A1 Control System” instructions.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Note on placement of the player

Be sure to place the player in a flat, horizontal place. If the player is left in a slanted position, it may cause a malfunction or damage the player.

About the Supplied Remote CommanderUnderstanding the 2 way remote system

This remote operates under a 2 way remote system. With the 2 way remote system, the component responds to signals sent from the remote by sending additional signals (information about the status of the component, text data, etc.) back to the remote. Thus, operations are performed as a result of communication between the remote and the component.

Component

When using a home entertainment system comprised of several components compatible with the 2 way remote system, please restrict 2 way remote system operation to a single component. Normally, turn off the 2 way remote system on all components except the receiver. If you would like to turn off the player’s 2 way remote system, see “Turning off a player‘s response to remote signals” on page 6.

5GB