When you connect the second player, you can play tracks in this player and those from the second player alternately from any play mode (see “Connecting Another CD Player” on page 9).
Select one of the following methods:
•
•
NO DELAY | |
| +100 |
I / u
á
1Select the desired play mode for each player.
2When you select
Press NO DELAY.
“NO DELAY” appears in the display.
When you select
Press
Each time you press the
n
after 90 sec Nafter 60 sec N
To change the current player each time a whole track is finished, select “at track end.”
To change the current player at the specified interval, press
Playing CDs
3Press áto start playing.
The MEGA CONTROL button lights up while the track in the second player is selected.
To cancel
Press the corresponding button repeatedly until
“NO DELAY” or
You can change the method
Press the corresponding button (NO DELAY or
You can start
Press FADER during
Even after you have set the
Notes
•The play starts from the second player if you start play while the MEGA CONTROL button is lit.
•When one player has played all the discs or tracks in the player ahead of the other player, the play stops.
•Do not use the controls on the second player during
When you connect the player to a Sony MD deck compatible with the Mega Control function or operate a Sony MD deck by using the computer software like “MD Editor,” you must set the player as shown below:
1Press MENU/NO.
2Turn the JOG dial until “CONTROL A1 ?” appears in the display window.
3Press YES.
To return to normal setting
After following steps 1 and 2, and “CONTROL A1 ?” is displayed, then press YES.
Notes
•You can perform the operation above correctly only when you operate Disc 1 to Disc 200.
•You cannot operate this player correctly from another
player which does not have the CONTROL A1 jack. In this case, operate the other player from this player.