Using the Player with Another Component
3Press H to start playing.
The MEGA CONTROL button lights up when a track in the second player is selected.
To cancel
Press the corresponding button repeatedly until “NO DELAY” or
zYou can change the method
Press the corresponding button (NO DELAY or
zYou can start
Press FADER during
Even after you have set the
Controlling the Player by Another Unit
When you connect the player to a Sony MD deck compatible with the Mega Control function, or operate a Sony MD deck by using computer software such as “MD Editor,” you must set the player as described below:
MENU/NO YES JOG
Notes
•Play starts from the second player if you start play while the MEGA CONTROL button is lit.
•When one player has played all the discs or tracks in the player ahead of the other player, play stops.
•Do not use the controls on the second player during
1Press MENU/NO.
2Turn the JOG dial until “CONTROL A1 ?” appears in the display window.
3Press YES.
“CONTROL A1??” appears in the display.
4Press YES.
To return to normal setting
After following steps 1 and 2, and “CONTROL A1II ?” is displayed, then press YES.
Notes
•You can perform the operation above correctly only when you operate Disc 1 to Disc 200.
•You cannot operate this player correctly from another player that does not have the CONTROL A1II jack. In this case, operate the other player from this player.