Playing CDs
1Before playing a CD TEXT disc, press
LANGUAGE.
“SELECT LANG” and the current operating language appear in the display.
2Turn ≠AMS ±until the language you want to select appears in the display.
3Push ≠AMS ±to select the language.
“READING TEXT” appears momentarily, then the display shows the new selected language.
4Press TIME/TEXT (or TIME on the remote) repeatedly until the information you want to check appears (see page 9).
Notes
•If your CD TEXT disc is not equipped with other languages, “CAN’T SELECT” appears in the display when you press the LANGUAGE button.
•If you press LANGUAGE while playing a CD TEXT disc, the current operating language appears momentarily.
•The operating language you have selected remains until you turn off the power.
Locating a Specific Track or a Particular Point in a Track
You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) on the player or number buttons on the remote.
You can also locate a particular point in a track while playing a disc.
MUSIC SCAN 0/) · ≠AMS ±
Number buttons
>10
Turning off indications in the display 
Each time you press DISPLAY ON/OFF on the remote while playing a disc, the display turns off and on alternately.
Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again.
Before you start playing, when you press DISPLAY ON/OFF to turn off the display, “DISPLAY OFF” appears, and when you press the button to turn on the display, “DISPLAY ON” appears.
=/+ 
0/) 
