Sony CDP-XB630, CDP-XB930, CDP-XB930E Playing CDs, Using the Display, Checking the remaining time, Display information while playing a disc

Playing CDs

Using the Display

You can check information about the disc using the display.

	TIME/TEXT
LANGUAGE	≠AMS ±

Display information while playing a disc

While playing a disc, the display shows the current track number, index number, playing time and music calendar.

TRACK	INDEX	MIN	SEC
			6	7	8	9	10

Current track		Music calendar
number
	Index number Playing time

The track numbers in the music calendar disappear after they are played.

TIME DISPLAY ON/OFF

Checking the total number and playing time of the tracks

Press TIME/TEXT (or TIME on the remote) before you start playing.

The display shows the total number of tracks, total playing time and music calendar.

TRACK	INDEX	MIN	SEC
			6	7	8	9	10

Total number of		Music calendar
tracks	Total playing time

While in Shuffle Play mode (“SHUFFLE” appears in the display; see page 13), a one-second access time blank is added between each track. This increase is automatically added to the total playing time in the display.

The information also appears when you press

§OPEN/CLOSE to close the disc tray.

Checking the remaining time

Each time you press TIME/TEXT (or TIME on the remote) while playing a disc, the display changes as shown in the chart below.

Playing time of the	TRACK	INDEX	MIN	SEC
current track				6	7	8	9	10
		Press
Remaining time on
	TRACK	INDEX	MIN	SEC
the current track				6	7	8	9	10

If the track number exceeds 24, “– – . – –” appears instead of the remaining time.

Press

Remaining time on	MIN SEC
the disc	6	7	8	9	10

If the remaining time exceeds 100 minutes in Programme Play mode or when the disc has more than 24 tracks, “– – . – –” appears instead of the remaining time.

Press

8GB