Recording From CDs
Fading In or Out
You can manually fade in or out to prevent tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL/COAXIAL) connector.
EDIT/TIME
FADER 0/) FADE ≠AMS ±
·P
Changing the fading time
You can change the fading time from 2 to 10 seconds before fading in or out. If you don’t change it, fading lasts for 5 seconds.
1Before you start playing, press FADER.
2Turn ≠AMS ±until the time you want appears in the display. When using the remote, press the number buttons to specify the fading time.
Notes
•The fading time is reset to 5 seconds when you turn off the player.
•If you press FADER during Music Scan (page 11), fade out time changes to 2 seconds.
Number buttons
FADER
Fading in or out at the point you want
To | Press FADER |
|
|
Start play fading in | During pause. “FADE” flashes. |
| Then play fades in. |
|
|
End play fading out | When you want to start fading out. |
| “FADE” flashes. Then play fades out |
| and the player pauses. |
|
|
Fading time lasts for 5 seconds. If you press FADER during Music Scan (page 11), fade out time changes to 2 seconds.
Fading out at the specified time (Time Fade)
You can have the player fade out automatically by specifying the playing time. Once you set the time fade, it works twice, that is, the play fades out at the end of both sides of a tape.
1Press EDIT/TIME FADE repeatedly before you start playing until “T.FADE” and “TAPE A” appear in the display.
2Press 0or )to specify the playing time. Each time you press these buttons, the display changes as shown below with the tape length of one side.
nHALF
n-
When you select “HALF”
The player sets the playing time to a half of the total playing time.
3Press ·to start playing.
At the specified time the play fades out and the player pauses. “TAPE B” appears in the display.
4To record on side B, reverse the tape and press · or Pon the player to resume playing.
Again, the play fades out at the specified time.