Recording From CDs
To cancel Time Fade
Press EDIT/TIME FADE.
You can freely specify the recording time
See “You can specify the tape length freely in Step 2” on page 16.
You can change discs during Time Fade
If the play ends before the specified
You can fade in to resume playing in Step 4
After you reverse the tape, press FADER.
Notes
•Time Fade will be cancelled if you press 0or )during the operation.
•“HALF” does not appear when the disc has more than 24 tracks.
Useful Tips for Recording
Using these functions makes recording CDs more convenient.
PEAK SEARCH AUTO SPACE | p |
Adjusting the Recording Level (Peak Search)
The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
1Before you start playing, press PEAK SEARCH.
“PEAK” flashes in the display and the player starts scanning the disc searching for the highest peak level.
After scanning all the tracks, the player repeats the portion with the highest peak level.
2Adjust the recording level on the deck.
3Press pon the player to stop Peak Search. “PEAK” disappears from the display.
Note
The portion with the highest level may differ every time you try the adjustment on the same disc. The difference is, however, so slight that you won’t find any problem in adjusting the recording level precisely.
Inserting a blank space between tracks (Auto Space)
When the space between tracks is too short for the AMS function to work, you can insert a blank space of 3 seconds between each track while playing. This enables easy location of tracks using the AMS function of the deck .
Press AUTO SPACE.
“AUTO SPACE” appears in the display.
To cancel Auto Space
Press AUTO SPACE.
Note
If you use the Auto Space function when recording, for example, a medley or symphony, the sound may be interrupted where the track number changes. It happens when the track numbers are assigned in the middle of the piece.