Sony CDP-XB630, CDP-XB930, CDP-XB930E 15GB, Playing CDs, Recording From CDs, Checking the track order, Changing the track order, Recording Your Own Programme

PLAY MODE

≠AMS ±

Recording From CDs

Recording Your Own Programme

You can record the programme you’ve created on a tape, DAT or MD. The programme can contain up to 24 tracks.

By inserting a pause during programming, you can divide the programme into two for recording on both sides of a tape.

Playing CDs

Checking the track order

You can check your programme before or after you start playing.

Press CHECK.

Each time you press this button, the display shows the track number in the programmed order. After the last track in the programme, the display shows “– END –” and returns to the original display. If you check the order after you start playing, the display shows only the remaining track numbers.

Changing the track order

You can change your programme before you start playing.

To	You need to	· P
To	You need to
		1 Create your programme (for side A when
Erase a track	Press CHECK until the track	1 Create your programme (for side A when
	you don’t want appears in	recording on a tape) while checking the total
	the display, then press	recording on a tape) while checking the total
	the display, then press	playing time indicated in the display.
	CLEAR	playing time indicated in the display.
	CLEAR	Follow Steps 1 to 4 in “Creating a programme on

Erase the last track in the	Press CLEAR. Each time you
Erase the last track in the	Press CLEAR. Each time you	the player” on page 13 or Steps 1 and 2 in
programme	press the button, the last	the player” on page 13 or Steps 1 and 2 in
programme	press the button, the last	“Creating a programme using the remote” on page
	track will be cleared.	“Creating a programme using the remote” on page
		14.
Add tracks to the end of the	Turn ≠AMS ±until	14.
Add tracks to the end of the	Turn ≠AMS ±until	“TAPE A” appears in the display.
programme	the track number you want	“TAPE A” appears in the display.
programme	the track number you want
	to add appears, then push	2 When you record on both sides of the tape, press
	≠AMS ±.	2 When you record on both sides of the tape, press
	When using the remote,	Pto insert a pause.
	press the number buttons of	Pto insert a pause.
	press the number buttons of	“P” and “TAPE B” appear in the display and the
	the tracks to be added.	“P” and “TAPE B” appear in the display and the
	the tracks to be added.	playing time is reset to “0.00.”

Erase the whole programme	Hold down CLEAR until
Erase the whole programme	Hold down CLEAR until	When you record on one side of the tape or on a
completely	“CLEAR” appears in the	When you record on one side of the tape or on a
completely	“CLEAR” appears in the	DAT or MD, skip this step and go to Step 4.
	display. Create a new	DAT or MD, skip this step and go to Step 4.
	programme following the
	programming procedure.	A pause is counted as one track
		You can programme up to 23 tracks when you insert a
		You can programme up to 23 tracks when you insert a
		pause.
		3 Repeat Step 1 to create the programme for side B.
		4 Start recording on the deck and then press ·on
		the player.
		When you record on both sides of the tape, the player
		pauses at the end of the programme for side A.
		5 When you record on side B, reverse the tape and
		press ·or Pon the player to resume playing.
		To check and change your programme
		See page 15.
		“TAPE A” appears while checking the programme for
		side A and “TAPE B” appears while checking the
		programme for side B.
		(Continued)