DSP functions
Problem | Cause/Solution |
No sound, or sound is too low. | The volume of the rear speakers may have been automatically |
| lowered in order to maximize the effect of the listening position |
| adjustment. |
| nPress (+) to adjust the balance. |
| The speaker balance can be set separately for the DSP on |
| mode and DSP off mode (page 15). |
|
|
Error displays (when optional CD/MD changer is connected)
The following indications will flash for about five seconds, and an alarm sound will be heard.
Display |
| Cause | Solution | |
NO MAG | The disc magazine is not inserted in | Insert the disc magazine with discs | ||
the CD/MD changer. | into the CD/MD changer. | |||
|
|
|
| |
NO DISC | No disc is inserted in the CD/MD | Insert discs in the CD/MD changer. | ||
changer. |
| |||
|
|
|
| |
|
| A CD/MD cannot play because of | Insert another CD/MD. | |
NG DISCS some problem. |
| |||
|
| A CD is dirty or inserted upside | Clean or insert the CD correctly. | |
ERROR*1 | down.*2 |
| ||
An MD does not play because of some | Insert another MD. | |||
|
| |||
|
| problem.*2 |
| |
BLANK* | 1 | No tracks have been recorded on an | Play an MD with tracks recorded on | |
| MD.*2 | it. | ||
|
|
|
| |
RESET |
| The CD/MD changer cannot be | Press the reset button of the this unit. | |
| operated because of some problem. |
| ||
|
|
|
| |
NO READY | The lid of the MD changer is open or | Close the lid or inserted the MDs | ||
MDs are not inserted properly. | properly. | |||
|
|
|
| |
HI TEMP | The ambient temperature is more than | Wait until the temperature goes down | ||
50° C (122° F). | below 50° C (122° F). | |||
*1 When an error occurs during playback of an MD or CD, the disc number of the MD or CD does not appear in the display. *2 The disc number causing the error appears in the display.
If the
EN
Information Additional
27