TV/Video

With the optional TV tuner and TV monitor connected

Watching the TV

1 Press (SOURCE) repeatedly until “TV” appears.2 Press either side of (SEEK/AMS) to select the desired TV band.

Watching the video

EN 1 Press (SOURCE) repeatedly until “TV” appears.2 Press (MODE) repeatedly to select “VIDEO 1.”

Play back the video.

Note

“VIDEO 2” appears if the VIDEO 2 terminal of the TV monitor is selected.

Memorizing TV channels automatically

The unit selects the TV channels with the strongest signals and memorizes them in the order of their frequency.

Caution

When tuning in the station while driving, use Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly until “TV” appears.

2 Press (SHIFT), then press (3) (PLAYMODE) repeatedly until “AUTO MEM” appears.

3 Press (4) (n).

The unit stores TV channels in the order of their frequencies on the number buttons. A beep sound and setting is stored.

4 Press (SHIFT).

Notes

•The unit does not store TV channels with weak signals. If only a few TV channels are received, some number buttons will remain empty.

•When a preset number is indicated in the display, the unit starts storing TV channels from the one currently displayed.

Memorizing only the desired TV channels

You can store up to 10 channels on the number buttons in the order of your choice.

1 Press (SOURCE) repeatedly until “TV” appears.

2 Press either side of (SEEK/AMS) to tune in the TV channel that you want to store on the number button.

3 Keep the desired number button ((1) to(10)) pressed for two seconds until you hear a beep tone.

The number button indication appears in the display.

 

Note

18

If you try to store another channel on the same number

button, the previously stored channel will be erased.