Getting Started

 

 

Resetting the unit

 

 

Before operating the unit for the first time or

 

 

after replacing the car battery, you must reset

 

 

the unit.

 

 

Press the reset button with a pointed object,

 

 

such as a ball-point pen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

button

 

 

 

 

Notes

 

 

• Pressing the reset button will erase the clock and some

 

 

memorized functions.

EN

 

• When you connect the power supply cord to the unit or

 

 

reset the unit, wait for about 10 seconds before you insert

 

 

a disc. Do not insert a disc within these 10 seconds;

 

 

otherwise, the unit will not be reset, and you will have to

 

 

press the reset button again.

 

 

 

 

 

 

 

 

Detaching the front panel

 

 

You can detach the front panel of this unit to

 

 

prevent the unit from being stolen.

 

 

1 Press (OFF).

 

 

2 Press (RELEASE) to open up the front

 

 

panel. Then slide the font panel a little

 

 

to the left, and pull it towards you.

 

 

 

 

 

(OFF)

(RELEASE)

Notes

• Be sure not to drop the panel when detaching it from the unit.

If you press (RELEASE) to detach the panel while the unit is still on, the unit will turn off automatically to prevent the speakers from being damaged.

When you carry the front panel with you, put it in the

Attaching the front panel

Align part A of the front panel to part B of the unit as illustrated, and push until it clicks.

A

B

Notes

Be sure not to attach the front panel upside down.

Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.

Do not press hard or put excessive pressure on the display window of the front panel.

Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature.

Caution alarm

If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch is set to the A position).

If you connect an optional power amplifier and do not use the built-in amplifier, the beep tone will be disabled.

4

supplied front panel case.