Displaying the station name
Press (DSPL) during radio reception.

FM1

SUR EQ

￿

Each time you press (DSPL), the item changes as follows:

z Station name* z Frequency z Clock

*If the station name of a station is not stored, “NO NAME” appears in the display for one second.

Erasing the station name
1 Tune in any station and press (LIST) for two seconds.
2 Press (DSPL) for two seconds.
3 Press (+) or (Ð) to select the name that you want to erase.
4 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 3 and 4 if you want to erase other names.

5 Press (LIST) for two seconds.

The unit returns to the normal radio reception mode.

Locating a station by
name — List-up
1 Press (LIST) momentarily.

The name assigned to the station currently playing appears in the display.

SUR EQ

3 ￿

 

ENTER

2 Press (LIST) repeatedly until you find the desired station.
3 Press (5) (ENTER) to tune in the desired station.

Note

Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press (DSPL).

Other Functions

Adjusting the sound characteristics

You can adjust the bass, treble, balance and fader.

Each source can store the bass and treble levels independantly.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) nTRE (treble) nBAL (balance) nFAD (fader)

2 Adjust the selected item by pressing (+) or (Ð).

Adjust within three seconds after selecting. (After three seconds, the buttons function as volume control buttons.)

Muting the sound
Press (MUTE).

“MUTE-ON” flashes momentarily.

To restore the previous volume level, press (MUTE) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone mute function).

EN

Functions Radio/Other

9