Changing the sound and display settings

 

You can set:

 

• CLOCK (page 5).

 

• D.INFO (dual information) to display the

 

clock and the play mode at the same time

 

(ON) or to display the information

 

alternately (OFF).

 

• AMBER/GREEN to change the illumination

 

color to amber or green.

 

• AUTO-DIM (Dimmer) to change the

 

brightness of the display.

 

— Select “AUTO” to dim the display only

 

when you turn the lights on.

 

— Select “ON” to dim the display.

 

• BEEP to turn the beep tones on or off.

 

• RM (Rotary Remote) to change the operative

 

direction of the controls of the optional rotary

 

remote.

 

— Select “NORM” to use the rotary remote

 

in the factory preset position.

EN

— Select “REV” when you mount the rotary

 

remote on the right of the steering

 

column.

 

• A.SCRL (Auto Scroll) (page 11).

 

Note

 

If you connect an optional power amplifier and do not use

 

the built-in amplifier, the beep tone will be disabled.

 

1 Press (SHIFT).

 

2 Press (2) (SET UP) repeatedly until the

 

desired setting mode appears.

 

Each time you press (2) (SET UP), the item

 

changes as follows:

 

CLOCK nD.INFO* nAMBER/GREEN n

 

AUTO-DIM nBEEP nRM nA.SCRL*

 

* When you have not tune the station or there is no

 

CD/MD being played, these items will not appear.

 

Note

 

The displayed item will differ depending on the source.

 

3 Press (4) (n) to select the desired

 

setting (for example: ON or OFF).

 

4 Press (SHIFT).

 

When the mode setting is complete, the

 

normal playback mode appears.

With Optional Equipment

CD/MD Changer

You can control up to 7 CD and MD changers with this unit.

Playing a CD or MD
1 Press (SOURCE) repeatedly to select CD or MD.
2 Press (MODE) until the desired changer appears (for example CD2 or CD3).

CD/MD playback starts.

When a CD or MD changer is connected, all the tracks play from the beginning.

Changing the displayed items

Each time you press (DSPL) during CD/MD playback, the item changes as follows:

$

Elapsed playback time

$

Disc name*1

$

Track name*2

$

Clock*3

*1 If there is no prerecorded name for a CD or MD, “NO NAME” appears in the display.

*2 If the track name of an MD is not prerecorded, “NO NAME” appears in the display.

*3 If the dual information function is on, the clock does not appear in the display.

Tip

If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (1) (N).

10