Changing the sound and display settings
You can set: •CLOCK (page 6).
•D.INFO (dual information) – to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).
•DIM (Dimmer) – to change the brightness of the display.
—Select “ON” to dim the display. •BEEP – to turn the beep tones on or off. •RM (Rotary Commander) – to change the
operative direction of the controls of the optional rotary commander.
—Select “NORM” to use the rotary commander in the factory preset position.
—Select “REV” when you mount the rotary commander on the right of the steering column.
•M.DSPL – to turn the motion display on or off.
Note
If you connect an optional power amplifier and do not use the
1
2 Press (2) (SET UP) repeatedly until the desired item appears.
Each time you press (2) (SET UP), the item changes as follows:
CLOCK nD.INFO* nDIM nBEEP nRM n
M.DSPL
*When you have not tune the station or there is no CD/MD being played, these items will not appear.
Note
The displayed item will differ depending on the source.
3 Press (4) (n) to select the desired setting (for example: ON or OFF).
4 Press (SHIFT).
After the mode setting is complete, the display returns to normal playback mode.
Boosting bass sound
—
You can enjoy a clear and powerful bass sound. The
You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the
Level | |
| |
|
0dB
Frequency (Hz)
Adjusting the bass curve
Turn the
To cancel, turn the control to the OFF.
Note
If the bass sound becomes distorted, adjust the D- BASS control or volume.
13