With Optional Equipment

CD/MD Unit

This unit can control a maximum of seven

Locating a specific track

—Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down and release for each track you want to skip.

external CD/MD units in this configuration: CD unit-maximum of five.

MD unit-maximum of five.

Any combination up to seven will work.

To locate succeeding tracks

To locate preceding tracks

SEEK/AMS

Playing a CD or MD

1 Press (SOURCE) repeatedly to select CD or MD.

2 Press (MODE) until the desired unit appears (for example: CD2 or CD3).

CD/MD playback starts.

When a CD or MD changer is connected, all the tracks play from the beginning.

Changing the display item

Each time you press (DSPL) during CD/MD playback, the item changes as follows:

$

Track number/

Elapsed playback time

$

Clock*

*If the dual information function is on, the clock does not appear in the display.

After you select the desired item, the display will be automatically change to the Motion Display mode after a few seconds.

In the Motion Display mode, all the above items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 13).

Locating a specific point in a track

—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

SEEK/AMS

To search forward

To search backward

Locating a disc by disc number

—Direct Disc Selection

Press the number button that corresponds with the desired disc number.

The desired disc in the current unit begins playback.

14