Press (SHIFT).
z FM1

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 10 stations on each band (FM1, FM2, and AM).

Caution

When tuning in stations while driving, use Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the tuner.

Each time you press (SOURCE), the source changes as follows:

z TUNER z CD z MD* z TV*

*If the corresponding optional equipment is not connected, this item will not appear.

2 Press (MODE) repeatedly to select the band.

Each time you press (MODE), the band changes as follows:

z FM2 z AM

3

4 Press (3) (PLAY MODE) repeatedly until ”BTM“ appears.

5 Press (4) (n) until ”B.T.M“ appears. The unit stores stations in the order of their frequencies on the number buttons.

A beep sounds when the setting is stored.

6 Press (SHIFT).

Notes

The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting.

When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

If a CD is not in the unit, only the tuner band appears even if you press (SOURCE).

Memorizing only the desired stations

You can store up to 10 stations on each band (20 for FM1 and FM2, 10 for AM) in the order of your choice.

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band.

3 Push the SEEK/AMS control up or down to tune in the station that you want to store on the number button.

4 Press the desired number button ((1) to

(10)) for two seconds until ”MEM“ appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

Receiving the memorized stations

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (10)) on which the desired station is stored.

8