Press (DSPL) for two seconds.
Select the CD unit (page 14).

Displaying the disc memo

Press (DSPL) during CD playback.

Each time you press (DSPL) during CD playback, the item changes as follows:

$

Track number/

Elapsed playback time

$

Disc memo name

$

Clock

Erasing the disc memo

1

2 Press (LIST) for two seconds.

3

4 Rotate the dial to select the name you want to erase.

5 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 4 and 5 if you want to erase other names.

6 Press (LIST) for two seconds.

The unit returns to the normal CD playback mode.

Locating a disc by name

—List-up (For a CD unit with custom file function or an MD unit)

You can use this function with discs that have been assigned a custom name. For more information on disc names, refer to “Labelling a CD” (page 15).

1 Press (LIST) momentarily.

The name assigned to the current disc appears in the display.

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (5) (ENTER) to play the disc.

Notes

•After a disc name has been displayed for five seconds, the display returns to normal playback mode. To turn off the display, press (DSPL).

•The track names are not displayed during MD playback.

•If there are no discs in the magazine, “NO DISC” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “NOT READ” appears in the display. To load a disc, first press the number button, then choose the disc that has not been loaded.

•There are also some letters which cannot be displayed (during MD playback).

16