Selecting specific tracks for playback

— Bank

(For a CD unit with custom file function)

If you label the disc, you can set the unit to skip or play the tracks of your choice.

1 Start playing the disc and press (SHIFT).

Then press (3) (PLAY MODE) for two seconds.

Bank edit mode

Note

If you have not labelled the disc, the bank edit mode does not appear. To return to the normal playback mode, press (SHIFT).

2 Push the SEEK/AMS control up or down to select the track number you want to skip and press (5) (ENTER).

The indication changes from “PLAY” to “SKIP.” To return the indication to “PLAY,” press (5) (ENTER) again.

3 Repeat step 2 to set “PLAY” or “SKIP” for all the tracks.

4 Press (3) (PLAY MODE) for two seconds. The unit returns to the normal CD playback mode.

5 Press (SHIFT).

Notes

•You can set “PLAY” or “SKIP” for up to 24 tracks.

•You cannot set “SKIP” for all the tracks on a CD.

Playing the specified tracks only

You can select:

•BANK-ON – to play the tracks with the “PLAY” setting.

•BANK-INV (Inverse) – to play the tracks with the “SKIP” setting.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “BANK” appears.

2 Press (4) (n) repeatedly until the desired setting appears.

z BANK-ON z BANK-INV z BANK-OFF

Playback starts from the track following the current one.

3 Press (SHIFT).

To return to the normal playback mode, select “BANK-OFF” in step 2 above.

17