Changing the sound and display settings

You can set:

•Clock (page 5).

•D.Info (Dual Information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•Amber/Green to change the illumination color to amber or green.

•Dimmer to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

•Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit‘s installed position.

•Beep to turn on or off the beeps.

•RM (Rotary Remote) to change the operative

EN

direction of the controls of the rotary remote.

—Select “norm” to use the rotary remote as the factory-set position.

—Select “rev” when you mount the rotary remote on the right side of the steering column.

•Loud (Loudness) to enjoy bass and treble even at low volume. The bass and treble will be reinforced.

•A.Scrl (Auto Scroll) (page 6, 15).

•Disc MEMO/TEXT name (Disc memo/CD- TEXT name) to set the priority display item when you connect an optional CD changer with the CD-TEXT and disc memo function (page 19).

1 Press (SHIFT).

2 Press (2) (SET UP) repeatedly until the desired item appears.

Each time you press (2) (SET UP), the item changes as follows:

Clock nD.Info* nAmber/Green nDimmer nContrast nBeep nRM nLoud* n A.Scrl* nDisc MEMO/TEXT name*

* When you have not tune the station or there is no

 

CD/MD being played, these items will not appear.

 

Note

 

The displayed item will differ depending on the source.

 

3 Press (4) (n) to select the desired

 

setting (for example: on or off).

 

For the ”Contrast“ setting, pressing (4)

 

(n) makes the contrast higher, and

14

pressing (1) (N) makes the contrast lower.

 

4 Press (SHIFT).

After the mode setting is complete, the display goes back to normal playback mode.