Erasing an entire program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
CD2 | DISC | TRACK |
SUR EQ | 4 | 7 P1.â8 |
| PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit mode appears. Press (3) (PLAY MODE) to display “P 1” above.
2 Press (1) (N) repeatedly until “DEL” appears.
DEL | |
SUR EQ | |
| PLAY MODEENTER |
To erase Program 2, press (4) (n) repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
EN |
| P1 | NO Data |
SUR EQ | |||
|
| ||
|
| PLAY MODE | ENTER |
The entire program is erased.
4 When you finish erasing programs, press
(3)(PLAY MODE) for two seconds.
5 Press (SHIFT).
Adding tracks to a program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
CD2 | DISC | TRACK |
SUR EQ | 4 | 7 P1.â8 |
| PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit mode appears. Press (3) (PLAY MODE) to display “P 1” above.
To select Program 2, press (4) (n) repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the track slot number where you want to insert a track.
|
| Track slot number |
CD2 DISC | TRACK | |
SUR EQ | 3 | 2 P1.â5 |
| ||
| PLAY MODE | ENTER |
| 3 Press either side of (SEEK/AMS) to select |
18 | the track you want to insert. |
|
4 Press (5) (ENTER) momentarily to enter the track.
The current track in that slot number and the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2 through 4.
Note
Once all 12 slots have been filled, “*Mem Full*” appears in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
(3)(PLAY MODE) for two seconds.
6 Press (SHIFT).
Erasing tracks in a program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
CD2 | DISC | TRACK |
SUR EQ | 3 | 2 P1.â7 |
| PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit mode appears. Press (3) (PLAY MODE) to display “P 1” above.
To select Program 2, press (4) (n) repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the track you want to erase.
|
| Track slot number |
CD2 | DISC | TRACK |
SUR EQ | 3 | 3 P1.â6 |
| PLAY MODE | ENTER |
The track currently registered in slot 6 of Program 1.
3 Press (5) (ENTER) for two seconds.
When you erase a track from a slot number, the succeeding tracks shift up to fill the gap.
DEL | DISC | TRACK |
SUR EQ | - | |
| PLAY MODE | ENTER |
|
| µ |
CD2 | DISC | TRACK |
SUR EQ | 4 | 7 P1.â6 |
| PLAY MODE | ENTER |
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6 Press (SHIFT).